Lm741 Dip IC

20.00

SKU: 000166 Categories: , Tag:

Description

The LM741 is a popular operational amplifier (op-amp) integrated circuit (IC) that has been widely used in electronics for many years. Here’s a brief description of the LM741 DIP (Dual Inline Package) IC:

Type: Operational Amplifier (Op-Amp) – The LM741 is an operational amplifier, which is a type of analog electronic component that amplifies voltage signals.

Package: DIP (Dual Inline Package) – The DIP package is a standard through-hole package with two rows of pins along the sides, making it suitable for through-hole soldering on a printed circuit board (PCB).

Power Supply: The LM741 typically operates with a dual power supply, with a recommended voltage range often around ±5V to ±18V. It can also work with a single power supply if needed.

Pin Configuration: The LM741 generally has eight pins, and the pin configuration is as follows:

Pin 1: Offset Null
Pin 2: Inverting Input (-)
Pin 3: Non-Inverting Input (+)
Pin 4: V-
Pin 5: Offset Null
Pin 6: Output
Pin 7: V+
Pin 8: NC (No Connection)
Open-Loop Gain: The LM741 has a high open-loop voltage gain, typically around 100,000 or more.

Common-Mode Rejection Ratio (CMRR): It has a moderate CMRR, making it suitable for various applications.

Input Bias Current: The LM741 has input bias currents that flow into the inputs, affecting the performance in certain applications.

Slew Rate: The LM741 has a relatively low slew rate compared to more modern op-amps, which may limit its performance in high-frequency applications.

While the LM741 was once a standard in many designs, there are more modern op-amps available today with improved specifications. It’s essential to consult the datasheet provided by the manufacturer for detailed specifications and application notes when using the LM741 in a circuit.