Cable 10 pin IDE

100.00

SKU: 000384 Categories: , Tags: , , , , ,

Description

A 10-pin IDE cable refers to a ribbon cable used in older computer systems to connect IDE (Integrated Drive Electronics) devices, such as hard disk drives and optical drives, to the motherboard. IDE cables are flat, wide cables with multiple connectors for attaching multiple devices in a daisy-chain fashion. They were commonly used before the widespread adoption of SATA (Serial ATA) cables for connecting storage devices.

Here are some key characteristics of a typical 10-pin IDE cable:

1. **Connector Types:** IDE cables typically have two connectors on each end. The larger connector is used to connect to the motherboard or controller, and the smaller connectors (usually 40-pin) connect to the IDE devices.

2. **Number of Pins:** The term “10-pin” might be a misnomer, as IDE cables commonly come in 40-pin and 80-conductor configurations. The 40-pin version is most common for standard IDE devices.

3. **Color Coding:** IDE cables often have color-coded connectors, with one end typically being gray and the other end being black. The color-coding helps distinguish the device connectors from the motherboard or controller connector.

4. **Twisted Pairs (80-Conductor Cable):** In some cases, IDE cables may have 80 conductors instead of 40. The additional conductors are used for twisted pairs to reduce crosstalk and improve signal quality, especially in higher-speed applications.

5. **Length:** IDE cables come in various lengths, with shorter cables being less prone to signal degradation.

6. **Latch or Key:** IDE connectors typically have a key or a tab to ensure correct orientation during connection.

It’s important to note that IDE cables are largely obsolete in modern computer systems, which commonly use SATA for connecting storage devices. However, IDE cables may still be found in older systems or as part of legacy equipment. If you’re working with older hardware, make sure to identify the correct type and orientation of the IDE cable for your specific application.

Reviews

There are no reviews yet.

Be the first to review “Cable 10 pin IDE”